***Please allow 4 to 6 weeks minimum for deliveries.***
RBR-15 MOD 2.1
We use only the highest quality parts in every facet of this rifle. The rifle feautres SLR ION 13.7" Hybrid Keymod Handguard. The RBR-15 MOD 2.1 s has our Rebel Arms 4150 CMV nitride medium contour barrel with mid-length gas system is capable of delivering 1 MOA accuracy with match ammo. The standard rifle comes with nitrided BCG, SilencerCo ASR 3-port muzzle brake, nitride gas system, premium GI fire control group. This rifle is handbuilt by one builder. Standard rifle comes optics ready.
Our 14.5" 4150 CMV Nitride barrel is chambered in 5.56x45mm NATO. The 1x7 Twist Rifling is capable of stabilizing light to heavy weight projectiles of up to around 77 grains.
Each Rebel Arms Barrel is capable of 1 MOA accuracy using match grade ammunition.
Silencerco ASR Muzzle Brake
The SilencerCo ASR 3-port muzzle brake is compatible with the Specwar, Saker, Omega, Hybrid, and Harvester Big Bore ASR mounting system. They offer one hand on, one hand off attachment/detachment. The 3-port design effectively reduces felt recoil and muzzle climb. (Ban state rifles will come with the SilencerCo Saker Trifecta Muzzle Brake. The ASR Blast Sheild will not work with the Saker Trifecta Muzzle Brake.)
Our receivers are fully machined from heat-treated, aircraft-grade aluminum forgings for superior strength and durability.
Our Mod II lower receivers are designed from a 7075 T6 aluminum alloy forging for reliable performance and outstanding durability. Our receivers are precision machined to ensure installation of mil-spec aftermarket components. Our receivers feature a low shelf for RDIAS use, a flared magwell for easier reloading and a groved front magwell for added grip.
Fire Control Group
The RBR-15 MOD 2.1 comes with a premium polished mil-spec fire control group. The trigger pull is measured at 5-7 lbs with standard length reset.
Nitride Bolt Carrier
This rifle features a high quality Nitride Bolt Carrier Group. Unlike phoshpated or parkerizing, our bolt carriers have a black nitrided surface that eliminates the need to apply oil to the carrier that can attract dirt, dust, unburned powder, and carbon and lead to cycling failures. The nitriding process creates an ultra-low friction coefficient to the surface. When you feel the surface of the carrier you will notice that it is much smoother and slipery to the touch. It also means less heat generated by metal on metal contact and also provides for easier cleaning.
The process hardens the steel as well, which makes this carrier have an increased resistance to wear thereby increasing the life of of the component and increases the amount of shots you can run over the life of it. The Gas Key comes already side-staked properly to the carrier.
Ambidextrous Safety Selector
TALON AMBIDEXTROUS SAFETY SELECTOR 4-LEVER KIT
The Talon™ ambidextrous safety selector is a modular design that can be installed as a standard 90° or as a 45° short throw by simply rotating the shaft 180° inside the lower receiver. Selector levers install using a precision machined dovetail interface with spring-loaded retention stud to lock the lever in place – no screws to come loose or break. The Talon is compatible with most semi-automatic AR15 & AR10/SR25-pattern rifles. Patent pending.
The RBR-15 MOD 2.1 comes standard with a RAPTOR-LT AMBIDEXTROUS CHARGING HANDLE
Utilizing the same patented ambidextrous functionality as its predecessor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability.
SLR ION 13.7" Hybrid Keymod Handguard
Mission First Tactical BATTLELINK Minimalist Stock
This is the lightest stock on the market. With heavy input from operators Mission First utilized the minimal amount of material while maintaining all the necessary functionality.
Battlelink Stocks are the evolution of battlefield technology manufactured using a specially developed reinforced, super tough polyamide from DuPont's Military Plastic Division. Putting the stock to your shoulder is the foundation of any stock. Holding true to the basics while adding functionality with the minimal amount of material possible was our goal. With heavy input from operators from all spectrums we saw the need to make a stock that offers all of the functional requirements while keeping the weight under 6 ounces. This stock adapts and changes to your environment or operational needs by utilizing custom accessory mounts and is able to accept a new optimized sling configuration. This ultimately makes our stock the lightest in today's AR accessories market.
EPG16V2 - Engage AR15/M16 Pistol Grip
15 degree angle improves comfort and control. Texture provides a positive grip surface with wet or gloved hands A combination of fit and function unparalleled by the originally supplied M16/AR15/M4/HK416 pistol grip. EPG16V2 Features and Functions: • 15 degree angle • Covers the receiver gaps that cause discomfort during sustained usage • Designed for M16/M4/AR15/HK41
The Rebel RBR-15 MOD 2.1 comes with the Mission First Tactical E- VolV enhanced trigger guard and is proudly made in the USA.
The Rebel RBR MOD 2.1 comes with one Magpul Pmag
Each RBR-15 comes with a Patriot hard case.
***All rifles have to ship to your local FFL. Please provide us with an FFL to ship the rifle to. Thank you!!***
|Barrel||4150 CMV Nitride|
|Bolt Carrier Group||Black Nitride|
|Muzzle Device||Silencerco ASR Muzzle Brake|
|Fire Control Group||Premium Polished Mil-spec|
|Gas Block||Slim Line Gas Block|
|Front Site||Optics Ready (none)|
|Rear Sight||Optics Ready (none)|
|Handgaurd||13.7" ION Hybrid Keymod Handguard|
|Stock||MFT Battlelink Minimalist|
|Overall Length Collapsed||33.50 Inches|
|Overall Lenth Extended||36.75 Inches|
|Product Weight||6 lbs|