No additional discounts or coupon codes offered at this time.*
Rebel RBR-15 S MOD 3
The clear answer to the perfect AR-15 platform is here, not redesigned, not new to the market, plain and simply brought to you with new value and respect. We at Rebel Arms, Primary Weapon Systems and Bootleg Inc. have worked hard to bring you the finest di rifle system in the world, renamed, rethought and redefined. after many months of development Rebel Arms Corp in collaboration with PWS® introduces the Rebel RBR-15 S MOD 3 and variants. This rifle is fully ambidextrous and has multiple different patented technologies. Rebel Arms is very proud to be the exclusive source for this rifle, and for the first time are offering this ground breaking weapon in multiple configurations and color options.
Our 14.5" 4150 CMV Nitride barrel is chambered in 5.56x45mm NATO. The 1x7 Twist Rifling is capable of stabilizing light to heavy weight projectiles of up to around 77 grains. Each Rebel Arms Barrel is capable of 1 MOA accuracy using match grade ammunition.
Saker Trifecta Muzzle Brake
This 3-port muzzle brake is compatible with the Saker MAAD Trifecta mounting system. It offers one hand on, one hand off attachment/detachment. The 3-port design offers exceptional recoil reduction.
Our lightweight Complete Upper Receiver offers less weight than a mil-spec upper receiver and we’ve done away with the forward assist to reduce snag risk.
Machined from forged 7075 aluminum to keep it light
Mil spec hard anodizing for durability
1.7 oz. lighter than a mil spec upper receiver with hardware installed
Captured dust cover door pin eliminating the need for the E clip
The Rebel MOD 3 lower receivers are forged, allowing for a much stronger and lighter product. A common known fact that has been lost through the marketing efforts of many AR 15 manufacturers is that a forging can produce a piece that is much stronger than a billet part. As the metal is shaped during the forging process, its internal grain aligns to follow the general shape of the part. As a result, the grain is continuous throughout the part, giving rise to a part that is stronger, yet lighter, than a billet receiver.
Weight – 7.5 oz.
7075 Al Forged
Fire Control Group
The Rebel RBR-15 S MOD 3 comes with a premium mil-spec fire control group. The trigger pull is measured at 5-7 lbs. with standard length reset.
ENHANCED BOLT CARRIER GROUP – 5.56 NATO/.223 REM
The enhanced bolt carrier is designed to reduce carrier tilt/cant during recoil and increasing reliability by strategically relocating key bearing surfaces. The enhanced carrier has fewer points of contact resulting in less friction area and the slight increase in carrier mass extends dwell time and ensures proper gas pressures for reliable extraction.
Forward Controls Enhanced Magazine Release-Competition
The Enhanced Magazine Release-Competition features a slightly curved button surface to fit the natural curvature of your finger. The form fitting curve, along with horizontal serrations, create a self-centering surface that inhibits the finger's vertical movements. The EMR-C has an uninterrupted surface and serrations, its taller profile makes it easier to press and is only 0.04 taller than the factory magazine release button.
Forward Controls Augmented Bolt Catch/Release
ABC/R (Augmented Bolt Catch/Release) with its angled and larger top paddle and lower paddle with increased surface area, is purpose designed for use with AR15/M16 receivers equipped with ambidextrous magazine releases. Specifically, it is designed to address the difficulty with accessing the factory bolt catch's lower paddle with an ambidextrous magazine catch, such as Norgon's Ambi-Catch, on the receiver. Many of the ambidextrous mag release's lower paddle is on the same vertical plane as the factory bolt catch lower paddle, making identification difficult by feel, especially with a gloved hand.
Ambidextrous Safety Selector
TALON AMBIDEXTROUS SAFETY SELECTOR
The Talon™ ambidextrous safety selector is a modular design that can be installed as a standard 90° or as a 45° short throw by simply rotating the shaft 180° inside the lower receiver. Selector levers install using a precision machined dovetail interface with spring-loaded retention stud to lock the lever in place – no screws to come loose or break.
The Raptor Pistol comes standard with a RAPTOR-LT AMBIDEXTROUS CHARGING HANDLE
Raptor-LT. Utilizing the same patented ambidextrous functionality as its predecessor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability.
13” PICMOD® WITH BCM® KEYMOD RAIL
Extruded 6061 aluminum to keep weight down
Mil-spec hard anodizing for durability
Full length mil-spec Picatinny top rail
PicMod rails allow mounting KeyMod and Picatinny accessories
Our specially designed handguard rail has a Picatinny rail on top and our specially designed PicMod handguard rails on the other three sides. This technology combines both Picatinny and KeyMod rail systems so you can attach nearly all KeyMod and Picatinny accessories with ease. Get the best of both worlds with Bootleg, Inc.’s specially designed handguard rail system!
8.6 oz. without mounting hardware
1.675” wide, 2.05” wide, 13.4” long
Designed to work with any barrel 14.5” or longer
HERA CQR BUTTSTOCK
Features & Specs
- HERA USA CQR Stock 12.12
- AR-15 Fixed Position Buttstock Upgrade
- Integrated angled pistol grip and fixed stock
- Web Sling and QD Attachment Points
- Understock Picatinny Rail Section
- Reinforced impact resistant polymer
- Weight 14.39 oz
Magpul 10 Round PMAG GEN M3
Each RBR-15 S MOD 3 comes with a Patriot hard case.
***All rifles have to ship to your local FFL. Please provide us with an FFL to ship the rifle to. Thank you!!***
|Barrel||4150 CMV Nitride|
|Bolt Carrier Group||Black Nitride|
|Muzzle Device||Silencerco ASR Muzzle Brake|
|Fire Control Group||Premium Polished Mil-spec|
|Gas Block||Low-Profile Gas Block|
|Front Site||Optics Ready (none)|
|Rear Sight||Optics Ready (none)|
|Handgaurd||13" Picmod Handgaurd|
|Grip||Magpul MOE GRIP AR15/M16|
|Overall Length Collapsed||N/A|
|Overall Lenth Extended||34 Inches|
|Product Weight||6lbs 6oz.|